No Time, No Budget: Build an eLearning Pipeline with the Tools You Have

The last grains of sand fall through an hourglass, in shades of gray on a black background.

By Allison Halterman

Here’s a scenario that would give any learning and development professional nightmares: A key program tied to our strategic direction and operating plan was ready to launch, with ready-made content lined up from a partner. When those plans fell through at the last minute, we had a cohort already scheduled to start and nothing for them to learn from. The subject matter expert (SME) and I talked it through and realized we were on our own. Failing to deliver was simply not an option.

The new plan was to build the five modules from scratch, one at a time. Each month, the SME would hand me the content for the next module as a Word outline. I would have two weeks to turn it into a self-paced course and load in the assignment instructions. Learners would complete the module on their own, upload an assignment, and then meet with the cohort to discuss. Then the cycle would start over. No new budget was allocated for the project, a familiar reality in the nonprofit world, so I worked with tools our team already had licensed.

Under those constraints, I didn’t have time to invent a new process for every module. I needed one I could repeat five times. Most of the tools I chose weren’t designed for learning, so part of the work was deciding how to adapt each one. The steps below are layers of the build rather than a strict order; the timeline at the end shows how they overlapped. Here’s how I approached this project.

Step 1: Triage the Content Before Opening Any Tool

The outlines came from an SME, not an instructional designer, so the first job was structural. I read each outline for flow, reordered sections so ideas built on one another, and looked for repeated or contradictory points. When two sections said nearly the same thing in different words, I merged them. When two said different things, I checked with my SME to clarify which was correct. When information seemed out of left field or I couldn’t connect one idea to the next, I pinged my SME to fill in the gap. I then added lesson headers based on the learning objectives, ensured every objective had a lesson aligned to it, and made sure every lesson centered on content that supported the objectives. I completed this process in one working day for each module.

With no time for a formal review cycle, this was fast, judgment-based editing. It also meant I knew the content well before I built anything, which made every later step quicker.

Key takeaway: Becoming familiar with the content and applying your lens as an instructional designer is critical for successfully working at this pace. Don’t outsource your first draft to artificial intelligence (AI). I didn’t use AI at this stage, but you could use your tool of choice to validate your decisions and find what you may have missed.

Step 2: Pick a Backbone That Handles Structure

I built each course in Articulate Rise, an authoring tool I already knew well. Its block-based layout let me move from outline to working draft quickly, and the courses work on any device without extra effort. Using one familiar tool as the backbone meant my limited time went to the learner experience instead of the mechanics of building pages.

As I outlined each module’s content, I decided what kind of block would best fit each topic. While I used some simple text and list blocks, I broke them up with interactive and visual elements. The first completed module became a template for the rest. While I continued to select blocks that fit each topic best, I kept consistent elements for repeated items such as “what’s next” blocks at the end of each lesson, reflection questions, and module summaries. If you don’t have Rise, any block-based or rapid authoring tool you have available will work.

Key takeaway: Use what is familiar and works for you. Now is not the time to try out a new tool!

Step 3: Add a Human Voice & Face

I wanted each module to open with a short “why this matters” animated explainer video, so I used Animaker. These brief videos connected the content to learners’ real work before they got into the details. I adapted an explainer video template within Animaker to keep these videos simple to create, with a consistent look and feel. Animaker also handled captions for the videos, so accessibility didn’t require a separate workflow.

Each module also features one or two talking-head videos created using Descript. I had previously created an AI model of my own voice so I could read a script naturally and have the tool perfect the sound instantly. Descript is built around editing audio and video via the transcript, so cutting a stumble or tightening a sentence takes seconds instead of a trip through a timeline. I used the same approach to record and fine-tune voiceover for the other video content. I chose one of the built-in AI characters to be the face of these videos, and I incorporated graphics and photos along with sections of bulleted text to keep the videos visually interesting. I used these videos in place of explanatory passages that would otherwise have been a couple of paragraphs of text.

Key takeaway: There are many affordable, simple tools for creating custom video content. Choose key moments in your content where short videos will pack the biggest punch so that the time you invest pays off.

Step 4: Fill Visual Gaps Without a Design Budget

When our image library and stock sites didn’t have what I needed, I used Copilot to generate custom images. Generated images deserve the same scrutiny as any other asset. Check them for accuracy, relevance, and anything odd before they go in front of learners.

To keep the courses from looking like default templates, I designed custom flip-card images in Canva and brought them into Rise. It was a small step, but it made the interactions look intentional instead of stock. I developed a convention of using brand colors, simple icons, and short titles for flip cards.

Finally, I used Mighty, a plug-in for Articulate Rise, to give each lesson visual flow, using gradient backgrounds that created a subtle shift from one block to the next and transition shapes to indicate when the lesson was continuing versus coming to a close.

Key takeaway: Developing under a time crunch doesn’t have to mean a boring, basic look and feel. Pick your visual battles and add interest where it most supports learning, and use templates so you can replicate and tweak quickly.

Making the 2-Week Cycle Work

For each module, the two-week cycle broke down as described below, with the caveat that I was also working on other projects, attending meetings, and responding to emails and requests. Some days I could focus almost completely on this project, while on others I was pulled in different directions.

Week 1

  • Day one: Triage the content, verify learning objectives, clarify questions with the SME, build an outline, and note what types of Rise blocks to use for each topic.
  • Days two to four: Create the Descript video(s) and the “why this matters” Animaker video.
  • Days three to five: Start building out lessons in Rise.

Week 2

  • Days six to eight: Finish building lessons in Rise.
  • Day nine: If the course looks too bland, add more custom images where needed, and make sure the videos don’t need further edits now that the rest of the course is built.
  • Day 10: With the module complete, add the background gradients and transition shapes, review the course as a whole to catch any last edits, and send it to the SME for review.

What I’d Tell Someone Facing the Same Crunch

  • Set expectations with your SME so they know to be available when you have questions.
  • Settle the sequence early so every module follows the same path from outline to launch.
  • Give each tool one job instead of asking any single tool to do everything.
  • Use the tools you have, along with AI for polish, and save your limited time for the content decisions only you can make.
  • Review AI-generated images and captions before publishing.

None of this is glamorous, but it kept a live cohort supplied with content on a schedule that didn’t leave room for a traditional development cycle. Once the first cohort has weighed in, I’ll know which of my quick decisions held up and where I can make improvements before we run the program again. I’ll share what I learn at the Everyday Tools in Learning Development Online Conference, Dec. 9–10.

Don’t Miss the Everyday Tools in Learning Development Online Conference!

Join Allison Halterman’s session, “No Time, No Budget: Build an eLearning Pipeline with the Tools You Have” at the Everyday Tools in Learning Development online conference, Dec. 9–10, 2026. Six fast-paced sessions share innovative solutions using tools that you already use every day. Learn to look beyond the typical L&D toolbox to use everyday tools, found objects, and more to create and enhance learning projects. Register today! Online conferences are free for Professional and Enterprise members.  

Image credit: artisteer

Share:


Contributor

Topics: